---
title: "IEC 62351 explained: security for grid protocols | Quantlix"
description: "IEC 62351 secures the protocols used to run power systems, from TLS profiles to IEC 61850 and key management. See what each part covers and how to apply it."
canonical: "https://quantlix.com/en/standards/iec-62351/"
last-updated: 2026-11-16
---

Source: https://quantlix.com/en/standards/iec-62351/
Language: en
Description: IEC 62351 secures the protocols used to run power systems, from TLS profiles to IEC 61850 and key management. See what each part covers and how to apply it.

**IEC 62351** [Security and resilience](https://quantlix.com/en/standards/#security)

# IEC 62351: security for power system communications

IEC 62351 is the IEC series that adds authentication, encryption, access control and key management to the communication protocols that run power systems, such as IEC 61850, IEC 60870-5 and DNP3.

[Discuss your project](https://quantlix.com/en/contact/) [Read the key points](https://quantlix.com/en/standards/iec-62351/#standard-overview)

## At a glance

**Full name**

Power systems management and associated information exchange: Data and communications security (IEC 62351 series)

**Published by**

International Electrotechnical Commission (IEC), Technical Committee 57

**Type**

International standard series (some parts are technical specifications or technical reports)

**Current version**

Revised part by part; recent editions include Part 3 Ed. 2.0 (2023), Part 7 Ed. 2.0 (December 2025) and Part 8 Ed. 2.0 (July 2026)

**Applies to**

Utilities, grid equipment vendors and integrators using IEC TC 57 protocols for SCADA, substation automation, telecontrol and distributed energy resources

**Last reviewed**

November 16, 2026 (2026-11-16)

## In plain terms

### Key points

- IEC 62351 is a multi-part series: each part secures one protocol family or adds a shared service such as access control or key management.
- Part 3 profiles TLS 1.2 and TLS 1.3 for TCP/IP protocols, and Part 6 secures IEC 61850 messages such as GOOSE and sampled values.
- Each part has its own edition, and several were revised from 2023 to 2026, so record the edition you implement.
- The protections take effect only when the protocol specification references the part and both endpoints support it.

### What is IEC 62351?

IEC 62351 is **the IEC series that secures the communication protocols used to monitor and control power systems**. It is published by IEC Technical Committee 57, the committee behind protocols such as IEC 61850 and IEC 60870-5, and it adds authentication, integrity protection, encryption and access control to them.

Many grid protocols were designed for closed networks, long before utilities linked substations, control centers and distributed energy resources (DER) over IP. IEC 62351 lets those protocols keep working while adding the protection modern networks need, and wherever it can, it profiles established internet standards such as TLS instead of inventing new ones.

### What IEC 62351 covers

- **Introduction and glossary.** Parts 1 and 2 explain the series and define its terms.
- **Protocol profiles.** Part 3 profiles TLS for TCP/IP protocols, Part 4 secures MMS (Manufacturing Message Specification) and its derivatives, Part 5 secures IEC 60870-5 and derived protocols such as DNP3, and Part 6 secures IEC 61850, including GOOSE and sampled values.
- **Network and system management.** Part 7 defines data objects for monitoring the health and security of devices such as intelligent electronic devices (IEDs) and remote terminal units, mapped to SNMP so network tools can read them.
- **Role-based access control.** Part 8 defines roles, the format of access tokens and how devices verify them, so people and applications receive only the rights they need.
- **Key management.** Part 9 covers certificates, private keys and the group keys used to protect GOOSE and sampled values.
- **Architecture, guidance and testing.** Technical reports cover security architecture (Part 10), DER resilience (Part 12) and guidance for writers of other standards (Part 13), and the IEC TS 62351-100 series defines conformance tests.

### Recent editions

Each part has its own edition, and several changed recently. Part 3 Edition 2.0 (June 2023) replaced the 2014 edition and its amendments, adding detailed TLS 1.2 settings, certificate revocation checks through CRL and OCSP, and a TLS 1.3 profile. Part 5 (January 2023) replaced a 2013 technical specification and added authenticated encryption of application data. Part 9 Edition 2.0 followed in June 2023, Part 7 Edition 2.0 in December 2025 and Part 8 Edition 2.0 on 22 July 2026.

**Record the part and edition each interface implements.** Two devices that both mention IEC 62351 may support different parts or editions, and the difference shows up only when they try to connect.

### How it fits with IEC 62443 and NERC CIP

IEC 62351 works at the protocol level. [IEC 62443](https://quantlix.com/en/standards/iec-62443/) sets requirements for security programs, system design and components across industrial control systems, and IEC guidance treats the two as working together. In North America, [NERC CIP](https://quantlix.com/en/standards/nerc-cip/) sets the regulatory requirements, and protocol security from IEC 62351 is one way to meet some of them, such as protecting data sent between control centers.

### How it shows up in software projects

- **Certificate lifecycle.** Devices and applications need certificates issued, renewed and revoked, with revocation checking built into every TLS connection.
- **Protocol gateways.** Gateways and SCADA front ends record, for each link, the part and edition in use, and flag a link that runs without protection.
- **Security events.** Several parts define security events. Software collects them and forwards them to monitoring tools, while the response stays with the utility’s security policy.
- **Role mapping.** Where a utility adopts Part 8, application roles map to the defined roles and devices check each access token.
- **Interoperability testing.** Test plans cover TLS settings, key renewal and failure cases with the actual devices involved.

### How we work with IEC 62351

We help utilities and grid vendors design and build software that uses these protections: certificate and key management workflows, secure gateway integrations for IEC 61850 and telecontrol protocols, and test plans that exercise each link. The work is led by our Utilities and Infrastructure practice under [Dr. Abdel-Hadi Hor](https://quantlix.com/en/about/leadership/abdel-hadi-hor/).

We never claim conformance on anyone’s behalf. Conformance to a part is shown by testing the actual devices, editions and settings, and we document that evidence clearly. See our wider work in [energy and utilities](https://quantlix.com/en/industries/energy-and-utilities/) and our guide to the protocol it most often protects, [IEC 61850](https://quantlix.com/en/standards/iec-61850/).

## Where it applies

Industries where this standard often shapes the work.

- ### [Energy & Utilities](https://quantlix.com/en/industries/energy-and-utilities/)

  Renewable energy, smart grids and energy storage systems

## Related standards

[All standards](https://quantlix.com/en/standards/)

- IEC 61850

  ### [Power utility automation and substations](https://quantlix.com/en/standards/iec-61850/)

  IEC 61850 is the international standard series for communication in power utility automation, defining device data models, the SCL configuration language and fast messaging for substations and other grid assets.
- IEC 62443

  ### [Industrial control system security](https://quantlix.com/en/standards/iec-62443/)

  IEC 62443 is the international series of standards for securing industrial automation and control systems, with requirements for asset owners, service providers, system integrators and product suppliers.
- DNP3

  ### [SCADA protocol for field devices](https://quantlix.com/en/standards/dnp3/)

  DNP3 is the Distributed Network Protocol, standardized as IEEE 1815, that SCADA masters use to poll and control RTUs and IEDs in electric, water and other utilities, with event reporting and time-stamped data.
- NERC CIP

  ### [Cyber security for the bulk power system](https://quantlix.com/en/standards/nerc-cip/)

  NERC CIP is the family of mandatory reliability standards that protect the cyber systems and critical facilities of the North American bulk power system, from system categorization to supply chain risk.

## Services that support this work

The services we usually bring to projects that involve this standard.

[View all services](https://quantlix.com/en/services/)

### [IoT and edge computing](https://quantlix.com/en/services/iot-edge-computing/)

Connect machines, sensors and business software with assessed IoT and edge integrations. Define data meaning, connectivity, permitted actions and recovery.

### [Enterprise applications](https://quantlix.com/en/services/enterprise-applications/)

Quantlix designs and builds enterprise applications for internal workflows, business rules and system integration, with clear access controls and maintainable architecture.

### [Technology assessment](https://quantlix.com/en/services/technology-assessment/)

Assess operational workflows, data, integrations and AI readiness. Quantlix helps define a bounded Proving Ground and evidence for the next investment decision.

## Questions, answered

What teams usually ask us about this standard.

**Is IEC 62351 mandatory?**

Not by itself. It is a voluntary international series, but a utility can make specific parts mandatory in a specification or tender, and its protections can help meet regulatory requirements such as NERC CIP-012 for data sent between control centers.

**Which part of IEC 62351 applies to IEC 61850?**

Several. Part 6 secures IEC 61850 messages that do not run over TCP/IP, such as GOOSE and sampled values, Part 4 secures MMS-based communication, Part 3 profiles TLS for the TCP/IP transport and Part 9 covers the keys and certificates they rely on.

**What is the latest edition of IEC 62351?**

The series has no single edition. Each part is revised separately: for example, Part 3 Edition 2.0 dates from June 2023, Part 7 Edition 2.0 from December 2025 and Part 8 Edition 2.0 from July 2026. Check the IEC webstore for the part you need.

**How is IEC 62351 different from IEC 62443?**

IEC 62351 secures specific power system protocols at the message and transport level. IEC 62443 sets security program, system and component requirements for industrial automation and control systems in general. IEC guidance says the two can be used together.

**Can a device be certified for IEC 62351?**

Conformance tests are defined in the IEC TS 62351-100 series, and some of those specifications are still in preparation. Interoperability is best shown by testing the specific part, edition and pair of devices involved.

## Official sources

Read the official text before relying on any detail. What applies to you depends on your role, your location and the version in force.

- [IEC 62351 and IEC 61850 cybersecurity (IEC)](https://iec61850.dvl.iec.ch/what-is-61850/technical-principles/61850-cybersecurity/)
- [IEC 62351-3:2023 (TLS profiles) on the IEC webstore](https://webstore.iec.ch/en/publication/68410)
- [IEC 62351-6:2020 (security for IEC 61850)](https://webstore.iec.ch/en/publication/63742)
- [IEC 62351-8:2026 (role-based access control)](https://webstore.iec.ch/en/publication/85153)

These guides explain each standard in plain terms. They are not legal advice, and they do not state that any product or organization conforms to a standard.

## Planning software around this standard?

Tell us which systems are involved and what you need to show. We will help you build the requirements in from the start.

[Discuss your project](https://quantlix.com/en/contact/)
