---
title: "How to extend food shelf life with technology | Quantlix"
description: "How technology makes food last longer: slow spoilage with steadier cold, read how much life each batch has left, and ship the shortest-lived stock first."
canonical: "https://quantlix.com/en/blog/extend-food-shelf-life-technology/"
last-updated: 2026-11-21
---

Source: https://quantlix.com/en/blog/extend-food-shelf-life-technology/
Language: en
Description: How technology makes food last longer: slow spoilage with steadier cold, read how much life each batch has left, and ship the shortest-lived stock first.

Playbook Food manufacturing

# How can technology make food last longer?

How technology makes food last longer: slow spoilage with steadier cold, read how much life each batch has left, and ship the shortest-lived stock first.

[Shahmir Abbas](https://quantlix.com/en/about/leadership/shahmir-abbas/)

Food Technology Lead

Nov 21, 2026 (2026-11-21) 14 min read

![Frosted plums and raspberries, with the headline “Fresher for longer”.](https://quantlix.com/_astro/insight-extend-food-shelf-life-technology.26TC7Fwa_Zd1EpM.webp)

01 / Engineering notes

Field notes: Blog

**On this page**

The short answer

Technology makes food last longer in three ways: it slows spoilage with faster cooling, steadier cold, coatings, high pressure processing and better packaging; it reads how much life each batch has left with scanners and time-temperature labels; and it ships the shortest-lived stock first. Your food safety team must validate any change.

Every piece of fresh food comes with a clock you cannot see. It starts when a mango leaves the tree or a fish leaves the water, and it never stops. Warmth makes it run faster, cold slows it down, and two pallets that look identical on a dock can have very different amounts of time left.

**Shelf life technology** is any tool that slows that clock, reads how much time a batch has left, or helps you ship by what it reads. This guide covers all three, with studies and company claims you can check, and ends with steps you can take this month without buying anything.

## Why does one extra day of shelf life matter so much?

One extra day can turn a discounted pack into a full-price sale, or a missed delivery into a delivered one. Two numbers show the scale of the wider problem. The Food and Agriculture Organization of the United Nations (FAO) [estimates](https://www.fao.org/sustainable-development-goals-data-portal/data/indicators/1231-global-food-losses) that **13.3 percent** of food was lost in 2023 in the stages after harvest and before retail. A [UN News report](https://news.un.org/en/story/2024/03/1148036) on the UN Environment Programme’s Food Waste Index Report 2024 counted **1.05 billion metric tons** of food wasted in 2022, about 19 percent of the food available to consumers.

A longer shelf life does not fix all of that, and it is one of several levers in our overview of [food industry challenges in 2027](https://quantlix.com/en/blog/food-industry-challenges-2027/). It does give every other decision more room: another city within reach of the truck, a container that survives a delay at the port, a buyer with less reason to reject a load.

## How much does temperature change how long food lasts?

Temperature sets the pace of spoilage more than anything else you control. FAO’s post-harvest guide for horticultural produce [says](https://www.fao.org/4/y5431e/y5431e04.htm) that most perishable produce has its best shelf life at about 0 °C, and that “the rate of deterioration of perishables however increases two to three-fold with every 10 °C increase in temperature.” A load held at 30 °C can therefore age two to three times as fast as the same load at 20 °C.

Colder is not always better. Some tropical and subtropical produce is hurt by deep cold, with symptoms such as discoloration, sunken spots and a failure to ripen. The guide’s table of lowest safe temperatures lists 10 °C for ripe mango and 13 °C for mature-green mango and bananas.

Timing counts as much as the number. The same guide gives one example: a one-hour delay in cooling strawberries after harvest resulted in a 10 percent loss due to decay during marketing.

A few degrees can buy real time. Shoji and colleagues [reported](https://agris.fao.org/search/en/providers/122535/records/65df58cf0f3e94b9e5d79b3b) in the Journal of Food Engineering in 2022 on 95 shipments of four fruits (cucumber, eggplant, strawberry and raspberry) from Spain to Switzerland. Lowering the shipment temperature by 5 °C extended strawberry shelf life by **36 percent** on average and raspberry shelf life by **73 percent**.

## What are the three ways technology adds days?

Technology adds days by slowing the clock, reading it, and shipping by it. Each step works on its own, and you can start with whichever fits your plant.

|  | What it means | Examples | A good first step |
| --- | --- | --- | --- |
| **Slow the clock** | Make the food spoil more slowly | Faster cooling, steadier cold, edible coatings, high pressure processing, better packaging | Cool sooner after harvest and keep the temperature steady |
| **Read the clock** | Measure how much life each batch has left | Near-infrared scanners, spectral cameras, time-temperature labels, container temperature records | Measure one valuable product for a season |
| **Ship by the clock** | Decide using real remaining life, not the arrival date | Shortest-lived stock first, freshest stock on the longest journey | Change the order for one product on one route |

## Which tools slow spoilage?

Four tools slow spoilage, and each suits different products. Test any of them on your own product before you count on it.

**Hold the cold, steadily.** Cooling sooner and holding a steady temperature is the oldest method, and the FAO rule of thumb and the 2022 shipment study both support it. A room that swings every time the door opens is not really holding its set point. Our guide to [cold room temperature monitoring](https://quantlix.com/en/blog/cold-room-temperature-monitoring/) shows how to catch those swings.

**Add a second skin.** An edible coating puts a thin extra layer on a fruit’s own skin. A 2024 review in the Journal of Food Science and Technology by [Sharma and colleagues](https://pmc.ncbi.nlm.nih.gov/articles/PMC11794942/) summarizes a 2023 study in which pomegranates treated with a chitosan film loaded with zinc oxide nanoparticles did not spoil until 20 days, while the control sample spoiled after 10 days. That is one laboratory result for one coating on one fruit, so a coating that works on pomegranates may do little for avocados. Rules on what may touch food also differ by country, so ask your regulator before a trial leaves the lab.

**Use pressure instead of heat.** **High pressure processing (HPP)** usually treats food in its final sealed package with very high water pressure instead of heat. Hiperbaric, a maker of HPP machines, [describes](https://www.hiperbaric.com/en/hpp-technology/what-is-hpp/) it as a non-thermal method at 5 to 20 °C, at up to 6,000 bar, held for a few minutes. The company says HPP inactivates pathogenic and spoilage microorganisms and extends shelf life “up to 3x to 30x” depending on the product. That is the maker’s own claim, and its page gives no test conditions. The page also notes that bacterial spores are highly resistant to pressure, says packs must be flexible, and advises against HPP for spices, powders and dry nuts or fruits.

Buying a machine is not the only way in. Hiperbaric also [describes tolling](https://www.hiperbaric.com/en/hpp-technology/hpp-tolling/), in which established HPP operators offer the service to other food companies. It says this gives access “prior to the investment or acquisition of an HPP unit,” and names small companies, startups, restaurateurs and new exporters as typical customers. Its page does not give prices.

**Package for the product.** Modified atmosphere packs replace the air around the food with a gas mix, and barrier layers keep oxygen out. The right choice depends on the food, so ask a packaging supplier for shelf life tests on your product, at your temperatures, before you change anything.

## How can you read how much life a batch has left?

You can estimate remaining life by measuring the food, the journey, or both. Scanners read the fruit, and labels and sensors record the trip.

**Scan it.** OneThird is a Dutch company with a portable scanner that uses near-infrared (NIR) light, which sits just beyond red and is invisible to us. An [August 2025 HortiDaily article](https://www.hortidaily.com/article/9757132/not-only-can-we-measure-sweetness-and-firmness-we-can-also-predict-shelf-life) says the scanner can measure sugar in strawberries, firmness in blueberries and dry matter in avocados. OneThird’s Eva Bourseau says models trained on real batch data “allow us to deliver highly reliable predictions of the products’ shelf life.” That is the company’s own claim. The article also says the company’s avocado scanner for consumers has been installed in supermarkets in 15 countries.

**Look beyond the surface.** Cameras that see more kinds of light than we do are a related approach. We explain how they work on a moving line in our guide to [multispectral cameras in food processing](https://quantlix.com/en/blog/multispectral-cameras-food-processing/).

**Let the label keep score.** A time-temperature indicator is a label that changes color as a pack spends time warm, a little like a banana browning. It adds up how warm and for how long, not only whether the pack got warm. Albrecht and colleagues [tested](https://doi.org/10.1007/s41783-019-00080-x) one in a national poultry supply chain and reported in 2020 that shelf life predictions based on the indicators’ discoloration were in accordance with the microbial shelf life.

**Follow the journey.** In a [2022 press release](https://www.eurekalert.org/news-releases/954758), Empa described tracking the temperature in 47 container loads of citrus fruit. The team used the temperature sensors that containers already carry, plus computer models of the fruit, and researcher Thijs Defraeye said half of all shipments were outside the optimal conditions for transport. Seeing that is the first step to talking about a slow route or supplier with evidence instead of a hunch.

## How does shipping by the clock work?

Shipping by the clock means sending first whatever will run out of time soonest, which the industry calls first expired, first out (FEFO). Most warehouses ship first in, first out, which is fair and easy to run, but a pallet that arrived yesterday after a hot, slow trip may have less life left than one that arrived last week and stayed cold.

With an estimate of remaining life on each batch, four habits open up:

- Send the stock with the least time left to the nearest customer, or the one who sells fastest.
- Put the freshest stock on the longest journeys, including export containers.
- Offer buyers evidence of how the food was handled, not only a date.
- Spot the supplier, route or shift that keeps shortening your shelf life, and fix it at the source.

None of this needs new machinery in the warehouse. It needs a number on each batch and a team willing to trust it.

An illustration, not a real plant: Picture a mango packhouse in midsummer. Two loads of the same variety arrive on the same afternoon. One came from an orchard nearby and went into the pre-cooler soon after picking. The other waited half a day by the roadside in strong heat. On paper they are identical, and under the old routine both get the same date and the one nearest the door goes first.

Now add a temperature logger on each load and an estimate of days remaining for every pallet on a screen in the dispatch office. The roadside load probably has less time left, so it goes to the local market tomorrow morning. The load with the long future goes into the export container. Nothing about the fruit changed. Only the decision did, and over a season the team can compare rejections and markdowns before and after to see whether it helped.

## Which everyday habits quietly cost days?

Most lost shelf life leaks away in small moments that nobody writes down. Four are worth watching first.

Cooling late. Fruit picked in the heat carries the field’s heat inside it. FAO’s guide says cooling begins with the rapid removal of field heat and warns against delays between cooling and loading into transit vehicles.

A thermometer in the wrong place. The same guide says that commodity temperature, rather than air temperature, should be measured in these facilities. Measure the temperature of the food itself, not only the air around it. Pallets near the door or stacked high at the back can live a much warmer life than the air beside the cooling unit.

Mixing produce that does not get along. Some produce gives off ethylene, a natural gas that speeds up ripening in sensitive produce nearby. FAO’s guide notes that mixed loads are common and that ethylene scrubbers can remove the gas from the air in a vehicle.

Trusting the date over the journey. A printed date is a promise made before anyone knew how the trip would go. The recorded journey is the better guide.

## What should your food safety team and regulator check first?

Any change that lengthens a shelf life or moves a date needs validation by your plant’s food safety team and, where the rules require it, the relevant regulator, before it reaches a label. This article is general information, not legal or food safety advice.

Longer life can change which hazards matter, because food spends more days in the supply chain. A new step such as HPP, a coating or a different pack belongs in your hazard analysis. HACCP, the preventive system set out by Codex Alimentarius, asks food businesses to validate their plans before use and verify them afterwards, as our [HACCP guide](https://quantlix.com/en/standards/haccp/) explains.

A scanner or a label gives you an estimate for planning. Whether a batch is safe to sell stays a decision for your quality staff. That is also how we approach software for [food and beverage producers](https://quantlix.com/en/industries/food-and-beverage/): the system records and flags, and your people decide.

## Where to start

You can do these four steps this month without buying anything.

1. Write down one product’s journey. Pick the product that worries you most when a truck is late. Record the time it is picked or received, when it reaches the cold room, each hand-off and when it ships.
2. Check where you measure. Put a thermometer you already own in the product, or a loaded pallet, for a few days, and compare it with the room reading.
3. Ask for temperature records. Ask your carriers and suppliers whether they keep temperature records for your loads. Empa’s 2022 release says every container is now equipped with one or more temperature sensors.
4. Try the new shipping order on paper. For one product on one route, list the batches, estimate which has the least time left, and see how often the order would change.

Before you talk to anyone selling a coating, a scanner or a monitoring system, write down four questions. Has it been tested on your product, at your temperatures? What does it need from your team every day? Where does the data go, and can you take it with you if you change supplier? What should you expect to see in the first three months? Then invite your food safety team into the conversation.

If you would like a second pair of eyes, tell us about one machine or one line and we will reply with a short note on what we would measure first. [Tell us about it](https://quantlix.com/en/contact/).

## Key takeaways

1. Temperature sets the pace: the FAO says perishables deteriorate two to three times faster with every 10 °C rise, so cooling sooner and holding steady cold comes first.
2. In a 2022 study of 95 shipments, shipping 5 °C colder extended shelf life by 36 percent on average for strawberries and 73 percent for raspberries.
3. Near-infrared scanners, time-temperature labels and container temperature records estimate remaining life per batch, so the stock that expires soonest can leave first.
4. Hiperbaric says high pressure processing extends shelf life up to 3x to 30x, depending on the product (a maker claim). Tolling lets a brand try it before buying a machine.
5. Any new shelf life, date label or process step needs validation by your food safety team and the relevant regulator before it reaches a pack.

## Questions people ask

### What is the simplest way to add days to fresh produce?

Cool it sooner after harvest and keep it at a steady, suitable temperature. An FAO post-harvest guide gives an example in which a one-hour delay in cooling strawberries was followed by a 10 percent loss from decay during marketing. It also says to measure the temperature of the produce itself, because air temperature can differ from it.

### How much does temperature affect shelf life?

A great deal. The FAO's post-harvest guide says the deterioration rate of perishables rises two to three-fold with every 10 °C increase. In one 2022 study of 95 shipments from Spain to Switzerland, lowering the shipment temperature by 5 °C extended average strawberry shelf life by 36 percent and raspberry by 73 percent. Some tropical fruit is hurt by deep cold, so the right temperature depends on the product.

### Can scanners or AI predict the shelf life of fresh produce?

Within limits. A near-infrared scanner measures things like sugar, firmness or dry matter in the fruit, and software trained on real batch data can turn those readings into a shelf life prediction. OneThird, a Dutch company, says its system does this for strawberries, blueberries and avocados. Check any such tool against your own product and your own quality records before you rely on it.

### What is high pressure processing, and can a small brand use it?

High pressure processing (HPP) usually treats food in its final sealed package with very high water pressure instead of heat. Machine maker Hiperbaric says it suits products such as juices, meat and avocado products, and that operators offer HPP tolling to other food companies, so a brand can try it before buying a unit. Hiperbaric advises against it for dry products such as spices and powders.

### What does first expired, first out mean?

First expired, first out (FEFO) means shipping whatever will run out of time soonest, not whatever arrived first. It needs an estimate of remaining life for each batch, from temperature records, scans or sample tests. The shortest-lived stock then goes to the nearest or fastest-selling customer, and the freshest stock goes on the longest journey.

### Do I need approval before I extend a shelf life or change a date label?

Often you need evidence first, and the rules differ by country and by product. Ask your food safety team to review the hazards and the supporting data before any date changes, and ask the regulator that covers your product what it expects. This article is general information, not legal or food safety advice.

## Sources

1. [Food and Agriculture Organization, food loss indicator, 13.3 percent in 2023 (SDG data portal)](https://www.fao.org/sustainable-development-goals-data-portal/data/indicators/1231-global-food-losses)
2. [UN News, on the UN Environment Programme Food Waste Index Report 2024 (March 2024)](https://news.un.org/en/story/2024/03/1148036)
3. [FAO, The role of post-harvest management in assuring the quality and safety of horticultural produce, section 3.2](https://www.fao.org/4/y5431e/y5431e04.htm)
4. [Shoji and others, shipment temperature and shelf life, Journal of Food Engineering, vol. 329 (2022)](https://agris.fao.org/search/en/providers/122535/records/65df58cf0f3e94b9e5d79b3b)
5. [Sharma and others, Nano-edible coatings for quality enhancement and shelf-life extension of fruits and vegetables, Journal of Food Science and Technology (2024)](https://pmc.ncbi.nlm.nih.gov/articles/PMC11794942/)
6. [Hiperbaric, What is HPP (company page)](https://www.hiperbaric.com/en/hpp-technology/what-is-hpp/)
7. [Hiperbaric, HPP tolling (company page)](https://www.hiperbaric.com/en/hpp-technology/hpp-tolling/)
8. [HortiDaily, OneThird article (20 August 2025)](https://www.hortidaily.com/article/9757132/not-only-can-we-measure-sweetness-and-firmness-we-can-also-predict-shelf-life)
9. [Albrecht and others, Implementation of time temperature indicators to improve temperature monitoring and support dynamic shelf life, Journal of Packaging Technology and Research (2020)](https://doi.org/10.1007/s41783-019-00080-x)
10. [Empa, digital twins of citrus shipments, press release (3 June 2022)](https://www.eurekalert.org/news-releases/954758)

Sources checked on Nov 21, 2026.

- Playbook
- Food manufacturing

Written by

## Shahmir Abbas

Food Technology Lead · Quantlix

[See full profile](https://quantlix.com/en/about/leadership/shahmir-abbas/)

[Talk to Shahmir](https://quantlix.com/en/contact/)

[More blog](https://quantlix.com/en/blog/)

## Keep reading

[More blog](https://quantlix.com/en/blog/)

- ![A worker in gloves filling food trays on a conveyor, with the headline “Food industry challenges in 2027”.](https://quantlix.com/_astro/insight-food-industry-challenges-2027.vpPBxeT6_Z2qPeGf.webp)

  Perspective

  Food manufacturing Nov 21, 2026 (2026-11-21)

  ### [What are the biggest challenges in the food industry in 2027, and what solves them?](https://quantlix.com/en/blog/food-industry-challenges-2027/)

  Seven challenges food makers face in 2027, from spoilage and quality checks to downtime, skills, supply shocks and costs, and the tools that help with each.

  20 min read Read
- ![Stainless steel processing tanks and pipework, with the headline “A cold room that looks after itself”.](https://quantlix.com/_astro/insight-cold-room-temperature-monitoring.D7XIDC3O_2jyEhe.webp)

  Playbook

  Industrial IoT Nov 21, 2026 (2026-11-21)

  ### [How do you monitor a cold room remotely and safely?](https://quantlix.com/en/blog/cold-room-temperature-monitoring/)

  How to monitor a cold room remotely and safely: what to measure, how a good alarm behaves, which records to keep and how to keep the controls off the internet.

  15 min read Read
- ![A microchip held in tweezers above a green circuit board, with the headline “Seeing what the eye cannot”.](https://quantlix.com/_astro/insight-multispectral-cameras-food-processing.BKT9tN72_Z1yxS3Y.webp)

  Playbook

  Food manufacturing Nov 21, 2026 (2026-11-21)

  ### [What can a multispectral camera see that a normal camera cannot?](https://quantlix.com/en/blog/multispectral-cameras-food-processing/)

  A multispectral camera records light the eye cannot see and can reveal hidden bruises, foreign material and early spoilage. Learn how to test one on a line.

  14 min read Read

## Need the version tailored to your platform, risk model and roadmap?

Bring us the context. We will turn the patterns in this library into a pragmatic delivery path your team can use.

[Plan a workshop](https://quantlix.com/en/contact/)
