---
title: "Data-driven decisions in food manufacturing | Quantlix"
description: "A food plant that runs on paper can start with one costly question and five numbers: stops, yield, giveaway, energy and rejects. Here is how, step by step."
canonical: "https://quantlix.com/en/blog/data-driven-decisions-food-manufacturing/"
last-updated: 2026-11-21
---

Source: https://quantlix.com/en/blog/data-driven-decisions-food-manufacturing/
Language: en
Description: A food plant that runs on paper can start with one costly question and five numbers: stops, yield, giveaway, energy and rejects. Here is how, step by step.

Playbook Food manufacturing

# How does a food plant that runs on paper start deciding with data?

A food plant that runs on paper can start with one costly question and five numbers: stops, yield, giveaway, energy and rejects. Here is how, step by step.

[Shahmir Abbas](https://quantlix.com/en/about/leadership/shahmir-abbas/)

Food Technology Lead

Nov 21, 2026 (2026-11-21) 16 min read

![A grey control panel with buttons, dials and switches, with the headline “From the logbook to the dashboard”.](https://quantlix.com/_astro/insight-data-driven-decisions-food-manufacturing.SP8PWWLf_29cctT.webp)

01 / Engineering notes

Field notes: Blog

**On this page**

The short answer

Start with one question that costs you money and the one number that answers it. In a food plant, the five most useful numbers are running time and stops, yield, giveaway, energy per unit and rejects. Capture them reliably, show them on one screen everyone can read, and decide from them before adding anything cleverer.

Picture two managers standing beside a silent filling line on a Tuesday morning, arguing politely about Monday. Output was short by a few thousand bottles. One is sure the filler, which has been temperamental all month, is to blame. The other watched the receiving bay sit empty until ten and is sure the fruit arrived late.

Being **data-driven** means settling an argument like that with what was measured, so experienced people can agree on what happened and what to fix first. Give those two managers one sheet of paper: the filler stopped eleven times on Monday for forty minutes in total, and the line waited ninety minutes for fruit. The argument ends in ten seconds, nobody loses face, and the first fix is not the filler. (The scene and its numbers are an illustration, not a real plant.)

This guide is for plants that still run on clipboards and whiteboards and would like to start. It covers the five numbers worth collecting first, two of them worked through with arithmetic, the evidence that measuring pays, and the steps from paper to prediction. For the wider picture, see our overview of [food industry challenges in 2027](https://quantlix.com/en/blog/food-industry-challenges-2027/).

## What does “data-driven” mean in a food plant, and what does it not mean?

A data-driven plant decides by what was measured, not only by what is remembered. That does not make experience count for less. It makes experience count for more, because experienced people ask the best questions of the numbers.

Here is an illustration. A new graduate with a dashboard can see that yield dipped on Thursday night. A shift supervisor with twenty years on the line might know why: Thursday is when the second supplier’s fruit arrives, and it runs a little riper. The numbers give judgment something solid to stand on, and they never replace it.

Data-driven also does not mean collecting everything. [ReFED’s May 2026 report](https://refed.org/uploads/2026-refed-ai-report-final.pdf) on AI and food waste found that the strongest AI waste-reduction results came from organizations that started with one tightly defined problem, and it advises building the data foundation before the AI. Without clean, up-to-date data, ReFED says, models give unreliable results that erode trust.

## Which five numbers should a food plant collect first?

A food plant should collect running time and stops, yield, giveaway, energy per unit and rejects, because each one connects directly to money. The last column shows a first way to capture each number with no new equipment.

| Number | The question it answers | Why it matters in food | A first way to capture it |
| --- | --- | --- | --- |
| **Running time and stops** | How much of the shift did the line run, and what stopped it? | Product waiting in a stopped line can be on a clock, such as a temperature or time limit | A stop log: start, end and a reason from a short list |
| **Yield** | How much of the raw material became sellable product? | Every kilo lost here was bought, handled and paid for | Weigh what goes into each batch and what comes out |
| **Giveaway** | How much more than the labeled weight goes into each pack? | A few extra grams per pack become metric tons in a year | Sample pack weights each hour, or a checkweigher record |
| **Energy per unit** | How much power, steam and water does each kilo of product need? | Ovens, boilers and cold rooms use a lot, and a drifting number can point to a fault | Meter readings at the start and end of each shift, divided by units made |
| **Rejects** | How much was thrown away, at which step, and why? | Shows where quality is really being lost, and what it costs | A tally at each reject point, by reason |

Two of these are worth a closer look, because many plants have never measured them well: giveaway, and the stops behind OEE.

## What is giveaway, and what can it cost?

**Giveaway** is the extra product that goes into each pack above the weight printed on the label. Filling machines are usually set a little high as a safety margin, and few plants know exactly how high.

The rules explain the margin. Under the European Union’s [Council Directive 76/211/EEC](https://eur-lex.europa.eu/eli/dir/1976/211/oj/eng) (in force, as amended), the actual contents of a batch of prepackages must not be less, on average, than the quantity on the label. Packs that fall short by more than the tolerable error must be rare enough for the batch to pass statistical tests, and a pack short by more than twice that error may not carry the EEC sign.

Other countries set their own tolerances, so check the rules in your market with your quality team. Everywhere, underfilling is a compliance problem and overfilling is a quiet money problem.

That quiet problem adds up quickly, and the arithmetic is simple (the figures here are made up). Say a biscuit line packs 20,000 packs a day, labeled 400 grams, and the packs actually average 408 grams. That is 8 grams of extra biscuit in every pack, or 2 percent, which comes to 160 kilos a day. Over a 300-day year it is 48 metric tons of product that was mixed, baked, wrapped and shipped at full cost, and paid for by nobody.

The fix is not to turn the filler down and hope. When pack weights vary a lot, the average has to sit well above the label so the light packs stay legal.

Narrow the spread, with better machine settings, a checkweigher that feeds its readings back to the filler, or steadier control of the product going in, and the average can move closer to the label without a single pack falling short. Move the target only after your quality team has checked the new fill weights against the rules that apply to you. Giveaway is a good first project because the money is already going out, and a few weeks of pack weights will show how much.

## How is OEE worked out on one shift?

**OEE**, short for overall equipment effectiveness, multiplies three ratios: availability (run time over planned production time), performance (how close the running speed is to the ideal) and quality (the share of output that is good), as [OEE.com](https://www.oee.com/calculating-oee/) defines it. It sounds intimidating, but it asks three plain questions: did the line run when it was meant to, how fast did it go when it ran, and how much of what it made was good?

Take a made-up eight-hour shift. The line was planned to run 480 minutes but ran 384, because of stops and a slow changeover: 80 percent. While running, it averaged 90 percent of its rated speed, and 97 percent of what it made passed inspection. Multiply them, 0.80 times 0.90 times 0.97, and the shift’s OEE is about 70 percent.

The single score is handy for watching a line over time. The three parts are where the action is. OEE.com puts stops, including breakdowns and changeovers, under availability, slow cycles and small stops under performance, and rejected parts and rework under quality. In this example the biggest gap is the time the line was not running, so that is where to look first.

One caution: OEE works best as a compass, not a league table. Comparing lines that make different products at different speeds tends to start arguments rather than settle them, so track each line against its own past.

## Does collecting this data actually pay off?

Companies report that it does, but their figures are their own estimates, so read them as a picture of what is possible rather than a promise for your plant.

In a survey of 600 executives from large manufacturing companies, conducted from August to September 2024 and published by [Deloitte](https://www.deloitte.com/us/en/insights/industry/manufacturing/2025-smart-manufacturing-survey.html) on 1 May 2025, respondents reported an average improvement of 10 to 20 percent in production output and 7 to 20 percent in employee productivity since putting smart manufacturing in place. These are the executives’ own answers, and the survey covers manufacturing broadly, not food alone.

A food example comes from ReFED’s May 2026 report. It describes CarVe, a computer-vision system Cargill built for its beef plants: cameras along the line check how much usable meat is left on each cut and give the operator color-coded feedback in real time. As of early 2026 it ran at three beef sites, and Cargill’s AI initiatives lead told ReFED that the yield gain is typically 3 to 5 percent per cut as workers improve. ReFED reports that Cargill has invested more than 20 million dollars in the project, so this is a large program, not a first step.

What is worth copying is the loop: a measurement reaches the person who can act on it within seconds.

There is also a reason not to wait too long. The Food and Agriculture Organization of the United Nations (FAO) reported on 6 November 2026 that its [Food Price Index](https://www.fao.org/worldfoodsituation/foodpricesindex/en/), 133.9 points for October, was 5.9 percent above October 2025, with the sugar index up 28.8 percent over the year. These are world commodity prices and your own costs depend on what you buy, but when prices move, knowing your yield and giveaway to the gram protects margin.

## What are the steps from paper to prediction?

The path has six rungs, and each one is useful on its own. You can rest on any of them for as long as you like.

1. **Write it down.** A paper log of stops, with a reason for each. It needs only a pen and a habit, and it already beats memory.
2. **Capture it automatically.** Read the numbers the machine’s own controller already keeps, or add a simple sensor where it is silent. Now the record is complete, and nobody has to fill it in at the end of a long shift.
3. **See it.** Put the numbers on one screen that everyone, from the operator to the owner, can read at a glance. Our guide to a [central monitoring screen for the plant](https://quantlix.com/en/blog/central-monitoring-system-food-plant/) shows how.
4. **Understand it.** Look for patterns. Do stops cluster after a changeover? Does yield dip on the night shift, or with one supplier’s fruit? This is where experienced people and good numbers improve each other, and it is the kind of work our [data analytics service](https://quantlix.com/en/services/data-analytics/) covers.
5. **Predict it.** With enough history, software can estimate what is likely next: the chance a machine stops this week, or that a batch falls short. We explain how in [machines that warn you before they stop](https://quantlix.com/en/blog/predictive-maintenance-food-plants/).
6. **Act on it automatically.** For a few well-understood decisions, let the system adjust a setting itself, within limits a person has set and can always override.

Safety comes first on rung 6. Critical limits in your food safety plan, such as a cooking temperature, stay under your quality team’s control, and a change to them needs their approval, not a dashboard’s.

A downtime forecast (rung 5) comes from software learning which patterns in a machine’s readings tended to come before past stops. Sensors record vibration, temperature and the power a machine draws, and the plant keeps a record of every past stop and its cause. Over months, the software can learn that a motor drawing a little more current, or a bearing whose vibration creeps up week after week, often came before trouble. Then, much like a weather forecast, it can say a particular pump has a high chance of stopping in the next two weeks, so the repair happens on a quiet Sunday rather than in the middle of a big order.

A forecast gives a chance, not a certainty, and it is only as good as the history behind it. That is the strongest argument for starting rungs 1 and 2 today, even if prediction is a year away.

Seeing your own stops, yield and energy clearly (rung 3) is already a large step, and a plant can rest there for a long while before it needs anything cleverer.

## Why will buyers and regulators ask for better records?

Good records are becoming valuable for another reason: regulators and the buyers you sell to are asking for more of them. This section is background, not legal advice. Your quality and regulatory team decides what applies to you.

In the United States, the [Food and Drug Administration’s food traceability rule](https://www.fda.gov/food/food-safety-modernization-act-fsma/fsma-final-rule-requirements-additional-traceability-records-certain-foods) ([FSMA 204](https://quantlix.com/en/standards/fsma-204/)) asks companies that handle foods on the Food Traceability List to keep records of key data elements at critical tracking events such as shipping, receiving and transformation. The records must be available to the FDA within 24 hours of a request. The compliance date was 20 January 2026; the FDA has proposed extending it by 30 months to 20 July 2028, and a Congressional act directed the agency not to enforce the rule before that date, which the FDA says it intends to follow (FDA page current as of 4 November 2026).

In Europe, the EU deforestation regulation applies from 30 December 2026 to large and medium operators and traders, and from 30 June 2027 to micro and small operators, according to the [European Commission](https://environment.ec.europa.eu/topics/forests/deforestation/regulation-deforestation-free-products_en). It covers cattle, cocoa, coffee, oil palm, rubber, soy and wood, and products made from them. If your products contain those commodities, ask your compliance team what records it asks of you.

Both sets of dates have shifted: the FDA has proposed moving its date, and the EU regulation was postponed in December 2024 and again in December 2025. The Commission also lists a simplification review dated 4 May 2026. Check the current dates before you plan around them. Records you already keep to run the plant are the raw material for answering requests like these.

## Which traps catch most plants?

Most of the traps are about people and habits, not technology.

- **Collecting everything.** A thousand readings nobody looks at are worth less than five that people check every morning. Add more only when a question needs it.
- **Building a screen nobody asked for.** Before designing anything, ask the shift supervisor what they wish they knew at six o’clock in the morning. Build that first.
- **Using numbers to blame.** The moment data is used to punish someone, people stop recording truthfully and the numbers become useless. Use them to fix machines and methods, and say so out loud, often.
- **Waiting for perfect data.** Rough numbers this month beat perfect numbers next year. A paper log with a few gaps still tells you more than memory does.
- **Forgetting to act.** A number that shows the same problem every morning and changes nothing is a more expensive way to feel bad. Give each number an owner who decides what happens when it moves.

## Where to start

You can begin this month without buying anything. Five steps:

1. **Pick one question you would love to settle.** Why were we short yesterday? Which product earns us the most? How much are we giving away in every pack? A first project can be as small as one question and one number.
2. **Write down what the number means.** For a stop log, agree in one sentence what counts as a stop and list the usual reasons, so every shift records it the same way.
3. **Collect it for a month.** Use paper if you must and the machine if you can. Tally pack weights, stops or rejects at the same point every day.
4. **Look at it together every morning.** A short huddle at the line with the supervisor and operator is enough. Ask what the number says and what you will do about it.
5. **Name an owner.** One person decides what happens when the number moves, and the result is checked again the next month.

By the end of the month you will have settled the question or found a better one, and you will have started a habit that is worth more than any single answer. If you would like a second pair of eyes, [tell us about one machine or one line](https://quantlix.com/en/contact/) and we will reply with a short note on what we would measure first.

## Key takeaways

1. Collect a single number for a month before adding another, so the team learns to read it and act on it every morning.
2. The five first numbers for a food plant are running time and stops, yield, giveaway, energy per unit and rejects.
3. Giveaway is extra product above the labeled weight. Illustration: 8 extra grams per 400 gram pack, 20,000 packs a day, 300 days, is 48 metric tons.
4. OEE multiplies availability, performance and quality. Use its three parts to see where a line loses time, and compare each line with its own past.
5. Records kept to run the plant help answer buyer and regulator requests. The FDA traceability rule, not enforced before July 2028, asks for listed-food records within 24 hours.

## Questions people ask

### What is data-driven decision making in manufacturing?

It means deciding from facts measured in the plant, such as running time, yield, giveaway and energy use, rather than from memory or opinion alone. Experience still matters as much as before. The numbers give experienced people a shared, reliable picture to judge from, so disagreements end sooner and an improvement can be checked afterward.

### What data should a food factory collect first?

Five numbers cover most of the money: running time with the reason for every stop, yield from raw material to sellable product, giveaway on pack weights, energy used per unit, and rejects by step and cause. Pick the one that answers your costliest question, and collect it daily for a month before adding another.

### What is OEE and how is it calculated?

OEE, or overall equipment effectiveness, multiplies availability (run time over planned time), performance (actual speed against ideal speed) and quality (good output over total output). A line that ran 80 percent of planned time, at 90 percent of its rated speed, with 97 percent good output, scores about 70 percent. The three parts show where the loss sits.

### What is giveaway in food packaging and how do you reduce it?

Giveaway is the extra product placed in each pack above the weight on the label, usually kept as a safety margin against underfilling. It is reduced by making fill weights more consistent, through better machine settings or a checkweigher that feeds readings back to the filler. Your quality team should check any new target against the rules that apply to you.

### Do I need expensive software to become data-driven?

No. Many plants begin with a paper log of stops and reasons. The next step is reading the numbers that machine controllers already hold, then showing them on one simple screen. Larger systems can wait until the plant knows which numbers people actually use each day and which questions they want answered next.

### How soon does the data start to be useful?

It depends on the question. Counting is quick: a month of reliable stop records can show which causes come up most, and a few weeks of pack weights show the spread. Forecasting is slower, because software needs enough history to learn what normal looks like, and how much history varies by machine and by the failure you want to catch.

## Sources

1. [Deloitte, Smart manufacturing survey, 2025 (published 1 May 2025)](https://www.deloitte.com/us/en/insights/industry/manufacturing/2025-smart-manufacturing-survey.html)
2. [ReFED, The Food Operating System: how AI is being deployed across the food system to reduce waste (May 2026)](https://refed.org/uploads/2026-refed-ai-report-final.pdf)
3. [Food and Agriculture Organization of the United Nations, Food Price Index (release of 6 November 2026)](https://www.fao.org/worldfoodsituation/foodpricesindex/en/)
4. [EUR-Lex, Council Directive 76/211/EEC on the making-up by weight or by volume of certain prepackaged products (20 January 1976, as amended)](https://eur-lex.europa.eu/eli/dir/1976/211/oj/eng)
5. [United States Food and Drug Administration, FSMA final rule on requirements for additional traceability records for certain foods (page current as of 4 November 2026)](https://www.fda.gov/food/food-safety-modernization-act-fsma/fsma-final-rule-requirements-additional-traceability-records-certain-foods)
6. [European Commission, Regulation on deforestation-free products (page read 21 November 2026)](https://environment.ec.europa.eu/topics/forests/deforestation/regulation-deforestation-free-products_en)
7. [European Commission, Access2Markets, Delay until December 2026 and other developments in the implementation of the EUDR (28 January 2026)](https://trade.ec.europa.eu/access-to-markets/en/news/delay-until-december-2026-and-other-developments-implementation-eudr-regulation)
8. [OEE.com, Calculating OEE (page read 21 November 2026)](https://www.oee.com/calculating-oee/)

Sources checked on Nov 21, 2026.

- Playbook
- Food manufacturing

Written by

## Shahmir Abbas

Food Technology Lead · Quantlix

[See full profile](https://quantlix.com/en/about/leadership/shahmir-abbas/)

[Talk to Shahmir](https://quantlix.com/en/contact/)

[More blog](https://quantlix.com/en/blog/)

## Keep reading

[More blog](https://quantlix.com/en/blog/)

- ![A worker in gloves filling food trays on a conveyor, with the headline “Food industry challenges in 2027”.](https://quantlix.com/_astro/insight-food-industry-challenges-2027.vpPBxeT6_Z2qPeGf.webp)

  Perspective

  Food manufacturing Nov 21, 2026 (2026-11-21)

  ### [What are the biggest challenges in the food industry in 2027, and what solves them?](https://quantlix.com/en/blog/food-industry-challenges-2027/)

  Seven challenges food makers face in 2027, from spoilage and quality checks to downtime, skills, supply shocks and costs, and the tools that help with each.

  20 min read Read
- ![A long control room lined with instrument panels, with the headline “One screen for the whole plant”.](https://quantlix.com/_astro/insight-central-monitoring-system-food-plant.CmxcUk1I_ZIbB0B.webp)

  Playbook

  Food manufacturing Nov 21, 2026 (2026-11-21)

  ### [What is a central monitoring system, and how does a food plant build one?](https://quantlix.com/en/blog/central-monitoring-system-food-plant/)

  A central monitoring system shows every line, cold room and machine stop on one screen. See what belongs on it and how a food plant builds one line at a time.

  14 min read Read
- ![Close-up of old machinery with brass gears, with the headline “Machines that warn you before they stop”.](https://quantlix.com/_astro/insight-predictive-maintenance-food-plants.BXZKidCI_ZquUlF.webp)

  Playbook

  Food manufacturing Nov 21, 2026 (2026-11-21)

  ### [How can a food plant know a machine will fail before it does?](https://quantlix.com/en/blog/predictive-maintenance-food-plants/)

  How a food plant can tell a machine will fail before it does: the readings to watch, who already does it, where projects go wrong and how to start small.

  16 min read Read
- ![A circular conveyor in a large, bright factory hall, with the headline “The model is the easy part”.](https://quantlix.com/_astro/insight-start-ai-in-a-factory.BsmMIis5_Z1XFbFd.webp)

  Playbook

  Industrial AI Nov 21, 2026 (2026-11-21)

  ### [How should a factory start with AI?](https://quantlix.com/en/blog/how-to-start-with-ai-in-a-factory/)

  Start AI in a factory with one line and one costly problem. Before you buy, check five things: machine data, wrong answers, an owner, internet loss and access.

  15 min read Read

## Need the version tailored to your platform, risk model and roadmap?

Bring us the context. We will turn the patterns in this library into a pragmatic delivery path your team can use.

[Plan a workshop](https://quantlix.com/en/contact/)
